RAM Mounting Systems

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four...

RAM-A-CAN™ II Universal Cup Holder Base with Double Ball MountThe RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases...

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA PlateThe RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole...

Horizontal Swing Arm Mount for Lowrance Elite-5 SeriesHorizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base.Compatible Devices:Lowrance Elite-5 Series

Horizontal 6" Swing Arm Mount with BallThe RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5"...

X-Grip® Large Phone Mount with Brake/Clutch Reservoir BaseThe RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter,...

X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir BaseThe RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in...

X-Grip® Large Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Twist-Lock Triple Suction Mount with 1/4"-20 StudThe RAP-B-365-224-202AU consists of a triple 3.3" diameter suction cup twist lock base, double socket arm and round base adapter that contains a...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup...

Square Post Base Clamp 5" Wide with 1.5" BallThe RAM-247U-5 is a clamp base with 1.5" rubber ball that will connect to rails up to 5" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 4" Wide with 1.5" BallThe RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 2" Wide with 1.5" BallThe RAM-247U-2 consists of a 2" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

No-Drill™ Laptop Mount for '05-21 Toyota 4Runner & TacomaThe RAM® No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing...

No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & TacomaThe RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68"...

Universal No-Drill™ RAM POD HD™Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole PatternBlending the best of versatility, strength and installation ease; the RAM POD...

Universal No-Drill™ RAM POD HD™Vehicle Mount with 18" LONG Length Pole and Double Socket ArmBlending the best of versatility, strength and installation ease; the RAM POD HD™ is a...