RAM Mounting Systems

RAM® Double U-Bolt Ball Base for 1.25" - 1.5" RailsThe RAM-235-1U consists of a double u-bolt base with 1.5" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate...

Tough-Ball™ with M8-1.25 x 10mm Threaded StudWhy call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility...

EZ-Roll'r™ Cradle for Apple iPad Pro 11"The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible...

EZ-Roll'r™ Cradle for SPOT X™The form-fitting, high-strength composite RAM® EZ-Roll’r™ cradle for the SPOT X™ allows for the attachment of RAM® components...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four...

RAM-A-CAN™ II Universal Cup Holder Base with Double Ball MountThe RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases...

Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The...

Horizontal Swing Arm Mount for Lowrance Elite-5 SeriesHorizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base.Compatible Devices:Lowrance Elite-5 Series

Horizontal 6" Swing Arm Mount with BallThe RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5"...

X-Grip® Large Phone Mount with Brake/Clutch Reservoir BaseThe RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter,...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Twist-Lock Triple Suction Mount with 1/4"-20 StudThe RAP-B-365-224-202AU consists of a triple 3.3" diameter suction cup twist lock base, double socket arm and round base adapter that contains a...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup...

EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a...

Square Post Base Clamp 5" Wide with 1.5" BallThe RAM-247U-5 is a clamp base with 1.5" rubber ball that will connect to rails up to 5" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 4" Wide with 1.5" BallThe RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 2" Wide with 1.5" BallThe RAM-247U-2 consists of a 2" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

No-Drill™ Laptop Mount for '05-21 Toyota 4Runner & TacomaThe RAM® No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing...