RAM Mounting Systems

RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base Part #: RAM-B-316-1U The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade...

Compatible Vehicles:Freightliner TrucksInternational TrucksKenworth TrucksMack TrucksPeterbilt TrucksVolvo Trucks Placement of Mount:Passenger side on the floor, under front seat Drilling...

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball...

RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square...

Universal Yoke ClampBoth strong and light weight, the RAP-B-121BU clamping base is perfect for numerous electronic devices. Modular in design, switch out the clamps for a perfect fit no matter what...

RAM Yoke Clamp Mount with Double Socket Arm and Round Base Adapter The RAM-B-121-202U consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp...

RAM Yoke Clamp Base with 1" Rubber Ball The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when...

RAM 1" x 1" U-Channel Clamp with 1" Ball The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare...

RAM Zinc Coated U-Bolt Base with 1" BallThe RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates...

RAM 3.3" Diameter Suction Cup Base with Twist Lock The RAP-224-1U, suction cup twist lock base contains a standard RAM double hole diamond shaped end. The 3.3" diameter suction cup is designed to...

RAM 1 Inch Ball with 1/4-20 Stud for Cameras The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches...

RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" BallThe RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the...

RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end...

RAM Double Socket Arm for 1.5" Ball BasesThe RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets,...

RAM Short Double Socket Arm for 1.5" Ball BasesThe RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end...

RAM Double Socket Arm for 1" Ball BasesThe RAM-B-201U, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets,...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1" Ball & Hardware for the Garmin echo™ 100, 150 & 300cThe RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball & Hardware for Garmin's echo™ 200, 500c & 550c The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5"...