E Size

RAM 3.68" Diameter Base w/3-3/8" BallPart #: RAM-E-202UThe RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

RAM Base 11" x 3" w/3-3/8" BallPart #: RAM-E-111BUThis plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may be needed to drilled for proper fit with your electronic device.Ball...

RAM Double Socket Arm f/3-3/8" Ball BasesPart #: RAM-E-201UThe RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

RAM Short Double Socket Arm f/3-3/8" BasesPart #: RAM-E-201U-DThe RAM-E-201U-D short double socket arm has a socket at both ends that accomodates 3-3/8" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

Forklift Overhead Guard Plate with E Size 3.38" BallSometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two...

Mixed Combination Pin-Lock Security Nut and Key Knob for 2.25"/3.38" Diameter D/E Size ArmsThe RAP-S-NUT5U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5U replaces all knobs on 2.25"/3.38" diameter D/E size arms and...

Ram Mixed Combination Pin-Lock™ Security Knob/Stud/Key Knob f/ 2.25"/3.38" D/E Size Arms and Gimbal BracketsThe RAP-S-NUT5-GU replaces the knob on 2.25"/3.38" diameter D/E size arms and gimbal bracket. The RAP-S-NUT5-GU offers the ideal amount of...

RAM® 100x100mm VESA Plate with BallThe RAM-E-246U consists of a 3.38" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. This product includes a set of washers intended to reduce the hole sizes in the...