RAM Mounting Systems

RAM Composite Short Double Socket Arm f/1" Ball BasesPart #: RAP-B-201U-AShort double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the...

RAM Composite Double Socket Arm f/1" Ball BasesPart #: RAP-B-201UStandard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

RAM Yoke Clamp Mount w/Diamond Base - Long Part #: RAM-B-121-C-238U Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on...

RAM Yoke Mount w/Ball & Arm Assembly - LongPart #: RAM-B-121U-CUniversal glare shield/yoke mount with LONG double socket arm and round base adapter that contains the universal AMPs hole pattern. ...

RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base AdapterPart #: RAM-B-121-238UConsists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the...

RAM V-Base Rail Yoke Clamp Mount f/Beechcraft AirplanesPart #: RAM-B-108BUAccommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate...

RAM Flex Adhesive Base w/1" BallPart #: RAP-B-378UConsists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach...

RAM 3" Diameter Suction Cup w/1" Plastic BallPart #: RAP-B224-2UColor: BlackBall Size: 1" Material:: High Strength Composite

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade...

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball...

RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square...

Universal Yoke ClampBoth strong and light weight, the RAP-B-121BU clamping base is perfect for numerous electronic devices. Modular in design, switch out the clamps for a perfect fit no matter what...

2" x 2.5" Diameter Base w/1" BallThe RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This...

RAM Yoke Clamp Mount with Double Socket Arm and Round Base Adapter The RAM-B-121-202U consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp...

RAM Yoke Clamp Base with 1" Rubber Ball The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when...

RAM 1" x 1" U-Channel Clamp with 1" Ball The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare...

RAM 1 Inch Ball with 1/4-20 Stud for Cameras The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches...

RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" BallThe RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the...

RAM Long Double Socket Arm for 1.5" Ball BasesThe RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end...