RAM Mounting Systems

EZ-Roll'r™ Cradle for SPOT X™The form-fitting, high-strength composite RAM® EZ-Roll’r™ cradle for the SPOT X™ allows for the attachment of RAM® components...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at...

Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four...

No-Drill™ Laptop Mount for '14-20 Ram Promaster + MoreThis No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the...

Horizontal Swing Arm Mount for Lowrance Elite-5 SeriesHorizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base.Compatible Devices:Lowrance Elite-5 Series

Horizontal 6" Swing Arm Mount with BallThe RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5"...

X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir BaseThe RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in...

X-Grip® Large Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large...

X-Grip® Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® cradle. Included in this package is hardware...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Square Post Base Clamp 5" Wide with 1.5" BallThe RAM-247U-5 is a clamp base with 1.5" rubber ball that will connect to rails up to 5" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 4" Wide with 1.5" BallThe RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 3" Wide with 1.5" BallThe RAM-247U-3 is a clamp base with 1.5" rubber ball that will connect to rails up to 3" maximum in width. Features:Material: Powder Coated Marine...

Square Post Clamp Base 2" Wide with 1.5" BallThe RAM-247U-2 consists of a 2" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

No-Drill™ Laptop Mount for '05-21 Toyota 4Runner & TacomaThe RAM® No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing...

2-Pack RAM® Roller-Ball™ Paddle & Accessory HolderWith the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push...

Universal No-Drill™ RAM POD HD™Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole PatternBlending the best of versatility, strength and installation ease; the RAM POD...

Universal No-Drill™ RAM POD HD™Vehicle Mount with 18" LONG Length Pole and Double Socket ArmBlending the best of versatility, strength and installation ease; the RAM POD HD™ is a...

4.75" Square Base with VESA (4 x 75mm) (4 x 100mm) Hole Patterns & 1.5" BallPlate Hole Patterns:100 x 100 VESA Pattern75 x 75 VESA Pattern100 x 50 Half VESA PatternMaterial:Powder Coated Marine...