RAM Mounting Systems

Description:The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the...

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match...

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball BasesKayak fishing is all about adaptability. RAM Mount offers the widest selection of...

Description:The Ball Side Track Base consists of a t-bolt, ratchet tooth and groove composition and 1.5" rubber ball. With a turn of the knob you can quickly fasten, adjust or remove the base to...

The RAM-111U-D consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains...

Description:The RAM-111U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base...

The RAM-101U-B-246 consists of a short double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists of a SHORT double...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket...

The RAM-101U-D-246 consists of a long double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern. The VESA plate contains a...

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 1.5" Rubber Ball SizeThe RAM-101U-246 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole...

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...

The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails from...

Double Suction Cup BaseRAM suction cups are regarded as one of the most impressive suction cups inthe world. The incredible holding power is surprising when considering howmost suction cups...

RAM Pod I Universal No-Drill Vehicle Mount w/Netbook TrayWell thought out and compact designs are common place at RAM and our RAM Tough Tray II™ is no exception. Spring loaded to create just...

12" Long Lower Female Tele-PoleThe RAM Tele-Pole 12" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as...

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & PlungerThe RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline...

RAM Tough-Tube Fishing Rod Holder w/3" Long Ratchet Spline Post ArmThe RAP-394-SSTU consists of the TOUGH-TUBE fishing rod holder and 3" long ratchet spline post arm. The ratcheting feature allows...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter...

1" Track Ball w/ T-Bolt AttachementDesigned to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including...