Ram Mount Store

RAM 1" x 2" Rectangle Base with 1.5" BallThe RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:Powder Coated Marine...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5"...

RAM 1.5" Diameter Ball Mount with 2/2.5" Round Bases - AMPs Hole PatternThe RAM-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented...

12" Long Lower Female Tele-PoleThe RAM Tele-Pole 12" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles™. The female...

RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions:Overall Length (Arm Socket to Ball End):...

2" x 5" Rectangle Base with 2.25" BallThe RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.Features:Material: Powder Coated Marine...

The (RAM-B-202U) RAM marine grade aluminum base contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball...

RAM 6.25" x 2" Universal Electronics Base with 1.5" BallThe RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will...

RAM 9" Long Lower Female Tele-PoleThe RAM Tele-Pole 9" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX and RAM-VP-TTMFXX top tele-poles. The female post is 9"...

RAM Mount Composite Diamond Base w/1" BallPart #: RAP-B-238UThe RAP-B-238U, composite diamond base, contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center,...

RAM Composite Short Double Socket Arm f/1" Ball BasesPart #: RAP-B-201U-AShort double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket...

Description:The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will...

RAM Composite Twist Lock Suction Cup Mount with Short Arm and No Ball BaseBall Size: 1" Rubber BallMaterial: High Strength CompositeColor: Black

RAM Cradle Holder for the Garmin dezl 560LMT & 560LTThis RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic...

This RAM high strength composite cradle is designed to hold the following devices: Garmin nuvi 200wGarmin nuvi 205wGarmin nuvi 250wGarmin nuvi 255wGarmin nuvi 260wGarmin nuvi 265wtMaterial:High Strength Composite Note:The "U" in the part number reflects...

RAM Cradle Holder f/Garmin nüvi 50 & 50 LMPart #: RAM-HOL-GA50UThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 50 Garmin nüvi 50LMMaterial:High Strength Composite Note:The "U" in the part...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note:The "U" in...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6...

RAM Double Socket Arm for 1.5" Ball BasesThe RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection...