Accessories

 With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.   NOTE: This solar panel will NOT charge other Bixpy Batteries and is...

You can now motorize your standup paddle board (SUP) with a quick change of your original fin to a Bixpy SUP Jet. The Bixpy SUP Adapter - Standard Fin Box fits into all standard fin boxes.  BIXPY PERFORMANCE INCLUDES Bixpy SUP Adapter - Standard...

The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.  FEATURES Sturdy and stable...

E-Series Battery Communication Terminator | EPropulsion Accessories In E-Series batteries parallel connection, the CAN-IN port must be connected to a communication terminator (or a remote switch). This terminator improves anti-interference...

Product description High-performance lithium battery 5.000 Wh Rated voltage 44.4 V Weight 36,5 kg Including battery management system with integrated protection against overcharging, short circuit, deep discharge, polarity reversal, overheating and...

No drilling. No holes. No hassle! The ThruHull™ Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds. The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear...

The Tiller Steering Handle arm is a universal addition to any Bixpy WillFit™ Adapters with a vertical down pipe (the blue pipes). You can easily bolt this steering adapter to your existing Bixpy Steering Wing and use it to steer...

Product description Top mount throttle with color display for Cruise models with TorqLink (from model year 2021) Integrated WLAN and Bluetooth for using the TorqTrac App Display shows all essential system information, GPS-based speed and remaining...

With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum...

This rugged accessory is the ultimate DIY Steering Bracket. Depending on your installation and setup, you may need to move your steering wing up or down along the motor shaft. The Adjustable V-ARM™ Steering Bracket gives you full range of...

Product description Anode set made from zinc for use with Cruise 10.0 / 12. 0R in seawater Consists of 1 shaft anode, 2 halfring anodes, 2 ring anodes

Replacement charger for Bixpy Outboard Battery with a 2 pin charging port.  Bixpy Outboard Batteries have a 2 or 3 pin charging port in the rear depending on the year of purchase. Depending on which model you have, you have to make sure...

This is the mounting plate for the Bixpy Hand Steering adapter. Hand Steering Handle - M4 x 25mm (bolt not included). 

Bixpy Motor Bumper (K-1 Motors) The Bixpy Motor Bumper is the perfect accessory if you use your Bixpy Motor in places where there is shallow water with the potential of the motor hitting the ground underwater. The bumper will help reduce the chance...

Bixpy Outboard Remote Control PLEASE NOTE: We offer three different Remote Controls Bluetooth Remote: for all Outboard Batteries that have white LED battery status lights (bluetooth) Version 2 & 3: for all Outboard Batteries that have blue LED...

Bixpy Simple Gudgeon The Bixpy Simple Gudgeon is needed to mount our Universal Rudder WillFit™ Adapter to most kayaks with pre-tapped mounting holes with screw inserts found on the stern of the kayak (such as Wilderness System,...

The Bixpy WillFit™ Gudgeon is designed to allow the mounting of a rudder with a 10mm pin onto most kayaks, canoes, small sailboats or whatever else you can dream up.   The “spider” shape and the bendable stainless steel 316...

Product description Waterproof to IP65 650W charging power The Power 48-5000 system may consist of up to two batteries connected in parallel. For faster charging, up to three chargers can be connected to the Power 48-5000 system. Charges the Power...

Product description Charges the Power 24-3500 from 0 to 100% in a max. of 14 hours & Power 26-104 from 0 to 100% in a max. of 11 hours Watertight to IP65 Charge current 10 A Ordering information Item number: 2206-20  | EAN:...