Kayaking Accessories Parts

Our 8 Ball Steering System contains parts and hardware for installation, or upgrade. Check out the installation videos below. Replacement Cables are also available. Installation Tandem - https://vimeo.com/611829529 11.5 and 13.5 - https://vimeo...

We are now using a solid Shear Pin. This solid pin will hold up much better than the previous version, which translates to less time replacing your Shear Pin and more time fishing!

Replacement propeller for Overdrive Pedal Unit. Overdrive Pedal Rapid Pedal Drive  

Take control of your kayak's tracking and improve your paddling efficiency with the “Beaver Tail" Rudder Kit. The oversized rudder blade’s action is controlled with your feet leaving your hands free for paddling. The Beaver Tail rudder system provides...

DRAIN PLUG Drain plugs are important for providing an access point to your kayak’s hull to drain out any water that might have found its way in. Feelfree Drain Plugs are threaded and have a retaining tab to keep the plug in place when unscrewed...

DRAIN PLUG Drain plugs are important for providing an access point to your kayak’s hull to drain out any water that might have found its way in. Feelfree Drain Plugs are threaded and have a retaining tab to keep the plug in place when unscrewed...

Hurricane Kayak Replacement Hatches 5 Inch Round: (5.5RHC) 5-INCH RUBBER HATCH COVER: Fits all Hurricane Skimmers and Sweetwater 126 8 Inch Round: (8RHC) 8-INCH RUBBER HATCH COVER: Fits Skimmer 140 Tandem and Skimmer 116; also some early...

FEELFREE SONAR POD The Feelfree Sonar pod makes it easy to install a fish finder and transducer without having to drill any holes into the kayak. Compatible With Lure II Lure 11.5 Lure 13.5 Lure 10 (V2 Only) Moken 12.5 (V2 Only)

  The Epic Boat Sock will help protect your boat while in storage or on the road from sunlight and light scratches and rubbing. It is made of a soft fabric material with a little bit of strech. Several sizes available, so please choose your...

The Transom Motor Plate gives you the ability to safely mount a variety of electric trolling and gas powered motors along with electric outboards such as Bixpy, ePropulsion, Torqeedo to the Bass 100. This plate is designed to offer additional...

Plastic piece that joins the rudder line behind the footboard and allows the system to be tightened or loosened quickly and easily. Sold individually.

When it comes to moving loads over soft sand, wider wheels are not necessarily better. Bulldozers and military tanks use long tracks, reducing the chance of them digging in. These will fit on any C-Tug, just snap the new wheels on. SandTrakz puncture...

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation...

Old Style Red Rudder Flag Red rudder flag made to fit specifically over the Epic weedless, univeral or surf rudders. The flag has a small pocket for allen key and pins.    There is no warranty on rudder flags. 

This kit only fits 3rd and 4th Gen V5/V7 models, as well as any customized (overstern rudder added) composite boat. Please reach out to us if you are unsure what generation your ski is.

PRODUCT INFO For paddling in medium sized or variable conditions Technical Specifications Replacement rudders may sometimes need the rudder shaft trimmed, due to the handmade nature of our boats. The shafts can be easily cut with a...

C-Tug with SandTrakz Wheels   Are you tired of lugging around those clunky, old-fashioned carts while kayaking and canoeing? Have they been causing you trouble in soft sand? Well, no need to worry because the C-TUG SandTrakz Cart is here to...

Perfect for staying connected to your boat! The coil leash attaches just below your knee. The Deluxe Leg Leash is equipped with a quick release clip. This is a valuable feature for paddlers going in and out of surf, as you typically do not want to...

Orange Kayak Flag New style safety flag for the back of your surfski. Works with all rudders and models! Slip the orange sleeve over the stern of you boat and secure the black bungee around your rudder and secure. 

This is a replacement handle for a kayak. It can be used for bow, stern and side.