RAM Mounting Systems

Tough-Claw Mount w/Universal X-Grip Phone HolderThe RAM-HOL-UN7-400U consists of the small Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four leg design that...

Tough-Claw Mount w/Self-Leveling Cup HolderThe RAM-B-132-400U consists of the small Tough-Claw base and universal self-leveling drink cup holder. The drink cup holder has two pivot points, allowing...

Universal X-Grip Holder f/12" TabletsThe new RAM X-Grip line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the...

Mixed Combination Pin-LockT Security Knob and Key Knob for 1.5" Diameter C Size ArmsThe RAP-S-KNOB5U consists of a 5/16"-18 female threaded security knob and key knob. The RAP-S-KNOB5U replaces all...

RAM Dual Articulating Suction Cup Base with 1" Ball BaseRAM Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when...

RAM Large Tough-Claw with 1.5" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars...

RAM Medium Tough-Claw with 1.5" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars...

RAM Medium Tough-Claw w/1" Diameter Rubber BallThe RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The...

RAM 18" Long Lower Female Tele-PoleThe RAM Tele-Pole 18" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill and Drill plate bases, as well as RAM-VP-TTMXX...

No-Drill Laptop Base for the Chevrolet Silverado 1500/2500/3500, Suburban, Tahoe, GMC Sierra 1500/2500/3500Compatible Vehicles: Chevrolet Silverado 1500 (2014) Chevrolet Silverado 2500 (2015)...

Description:The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...

Description:The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the...

The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains...

The RAP-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:High...

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match...

Description:The Ball Side Track Base consists of a t-bolt, ratchet tooth and groove composition and 1.5" rubber ball. With a turn of the knob you can quickly fasten, adjust or remove the base to...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists of a SHORT double...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket...

The RAM-D-201U-E powder coated marine grade aluminum LONG double socket arm allows for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect...

The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails...