RAM Mounting Systems

Power-Grip™ Universal Scanner Gun HolderWhether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has...

RAM® Quick-Grip™ XL Large Phone HolderThis version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The...

RAM® No-Drill™ Vehicle Base for 2019 RAM 1500This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side...

Composite Ball Adapter with AMPS Plate The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at...

Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers...

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA PlateThe RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole...

X-Grip® Large Phone Mount with Brake/Clutch Reservoir BaseThe RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter,...

X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir BaseThe RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in...

X-Grip® Large Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large...

X-Grip® Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® cradle. Included in this package is hardware...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup...

Low Profile Composite Double Socket ArmThe RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber...

EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a...

Square Post Clamp Base 2.5" Wide with 1.5" BallThe RAM-247U-25 consists of a 2.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

Square Post Clamp Base for Posts Up To 1.5" WideThe RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball. Features:Material: Powder Coated Marine Grade AluminumBall Size: C Size 1.5" Rubber...

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68"...

2-Pack RAM® Roller-Ball™ Paddle & Accessory HolderWith the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push...

RAM® Roller-Ball™ Paddle & Accessory HolderWith the RAM® Roller-Ball™ Clip for Tracks, easily secure your net, paddle, gaff hooks, stakeout/push poles, or BogaGrip®. Its...