RAM Mounting Systems

RAM® X-Grip® Large Phone Mount with RAM® Snap-Link™ Tough-Claw™The RAM-HOL-UN10-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle...

RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base...

RAM® Vertical Drill-Down Vehicle Base with Lower RAM® Tele-Pole™Vehicle base for: Commercial vehicles with tube frame seats. May also be used as a drill down base for most any flat...

RAM® Drop-N-Lock™ Scanner Gun HolderThe RAM Drop-N-Lock™ Scanner Gun Holder is a specially designed cradle that will hold most types of Gun Scanner handles. On the side of the cradle...

Power-Grip™ XL Universal Scanner Gun HolderThe RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts...

Power-Grip™ Universal Scanner Gun HolderWhether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has...

Tough-Ball™ with 1/4"-20 x .50" Threaded Stud The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most...

X-Grip® Phone Mount with 9mm Angled Bolt Head Adapter The RAP-B-272-A-UN7U consists of an angled base with 9mm hole, short composite double socket arm and universal spring loaded RAM®...

Spine Clip Holder with Ball for Garmin Handheld Devices With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™...

EZ-Roll'r Cradle for Apple iPad Pro 12.9" 3rd Gen The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the...

Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers...

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA PlateThe RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole...

Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The...

X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir BaseThe RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in...

X-Grip® Phone Mount with Handlebar U-Bolt BaseThe RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® cradle. Included in this package is hardware...

Double Socket Arm with Dual Extension & Ball AdapterThe RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm,...

Twist-Lock Triple Suction Mount with 1/4"-20 StudThe RAP-B-365-224-202AU consists of a triple 3.3" diameter suction cup twist lock base, double socket arm and round base adapter that contains a...

Twist-Lock Triple Suction Cup Ball BaseThe RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup...

Low Profile Composite Double Socket ArmThe RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end...

Composite Double Socket Swivel ArmThe RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber...