RAM Mounting Systems

Description:The Ball Side Track Base consists of a t-bolt, ratchet tooth and groove composition and 1.5" rubber ball. With a turn of the knob you can quickly fasten, adjust or remove the base to...

Description:The RAM-B-202U-RYM1 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are...

The RAM-111U-D consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains...

Description:The RAM-111U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base...

The RAM-D-101U-2461 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square plate with the VESA hole pattern. The VESA plate contains a 75mm...

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists of a SHORT double...

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of a LONG double socket...

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 2.25" Rubber Ball "D" SizeThe RAM-D-101U-246, heavy duty universal assembly, includes a universal base piece to mount heavy...

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter BallThis RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is...

The RAM-HOL-AP17U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping...

Double Suction Cup BaseRAM suction cups are regarded as one of the most impressive suction cups inthe world. The incredible holding power is surprising when considering howmost suction cups...

RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large TabletsThe RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod,...

RAM Pod I Universal No-Drill Vehicle Mount w/Netbook TrayWell thought out and compact designs are common place at RAM and our RAM Tough Tray II™ is no exception. Spring loaded to create just...

Compatible Vehicles:Chevrolet Silverado (2014)This No-DrillT Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails...

Compatible Vehicles:Chevrolet Silverado (2014)Placement of Mount:Across Transmission HumpDrilling Requirements:No - uses existing console bolts on vehiclesSeat Configuration:Bucket/Bench. Base will...

RAM STACK-N-STOW Bait Board w/18" Pipe, Post & SplineThe RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface...

RAM STACK-N-STOW Bait Board w/Combination Bulkhead/Flat Surface Base & PlungerThe RAP-395-BMPU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and combination bulkhead/flat surface...

RAM STACK-N-STOW Bait BoardThe RAP-395U includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water...

RAM EZ-ROLL'R Cradle f/SPOT Gen3This RAM high strength composite cradle is designed to hold the following devices: SPOT Gen3Features: Open access to all electronic ports Patented roller design for...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter...