RAM Mounting Systems

RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMTThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 2557LMTGarmin nüvi 2577LTGarmin...

RAM Cradle Holder for the Garmin nüvi 52, 52LM, 54 & 54LMThis RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 52Garmin nüvi 52LMGarmin...

RAM Rail Clamp Base with 1.5" BallThe RAM-271U-12 is a round pipe base that connects to a pipe with a diameter from 1.25" to 1.875". Material: Powder Coated Marine Grade Aluminum Ball Size:1.5"...

RAM Rail Base with Zinc Coated U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in DiameterThe RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting...

RAM 2" x 5" Bse w/1-1/2" BallThe RAM-202U-25 contains a 1" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base...

RAM 2" x 3" Rectangle Base with 1.5" BallThe RAM-202U-23 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner...

RAM 1.5" x 3" Rectangle Base with 1.5" BallThe RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at...

RAM 2" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at...

RAM 1.5 Inch Ball Base with Strap 0.5 Inch to 2 Inch DiameterThe RAM-108B consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in...

RAM 2" x 1.7" Base w/AMPs Hole PatternThe powder coated marine grade aluminum base consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four...

RAM 1.5" Ball with 1/4"-20 Male Threaded Post for CamerasThe RAM-237U, universal camera and camcorder base, consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 camera thread. The male...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also,...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also,...

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball BasesThe RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball...

RAM Double Socket Arm with Locking Knob for 1.5" Ball BasesThe RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring...

Knob w/Lock & 5/16"-18 Brass Hole - C-SizeThe RAM locking knob, includes a brass 5/16"-18 thread, for 1.5" socket arms; this allowing you to disengage the screwing of the knob. Once you have set...

RAM 18" Long Extension Pole with 1" and 1.5" Single Open SocketsThe RAP-CB-201-18U consists of a LONG extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees;...

RAM 14" Long Extension Pole with 1" and 1.5" Single Open SocketsThe RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360...

RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm...

RAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball EndsThe RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball...