Bixpy
Transom Adapter (K-1 and J-2 Motors)
- SKU:
- AT-UTM-2103
- MPN:
- 37963
- Weight:
- 5.50 LBS
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.
This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak.
Make sure that you are getting the right Bixpy adapter for your watercraft.
FEATURES
- Fits virtually any transom plate
- Adjustable depth
- Quick release disassembly
- Adjustable trim
- Super sturdy construction
INCLUDES
- Transom WillFit™ Adapter
- All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
- Tiller Steering Handle (2 sizes - 12" and 24" included)
- One Rubber grip for tiller handle
ADDITIONAL INFORMATION
- Attachment: Attaches to virtually any watercraft with a flat vertical mounting surface
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
- Length of horizontal blue pipe: 31 inches (79 cm)
INSTALLATION GUIDES
* Motors shown in pictures not included in Adapter Kits.
Related Products
Related Products
US Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the Bixpy Motor to your Paddle Board or Kayak within minutes. Make sure that you are getting the...
Universal Kayak Adapter (K-1 and J-2 Motors)
Bixpy
$179.00
With the Universal Kayak Adapter, you can attach your Bixpy K-1 or J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and...
DIY Fin Adapter for Inflatables (K-1 and J-2 Motors)
Bixpy
$69.00
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for...
Flip & Lock Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a Flip & Lock Fin Box, this Adapter will allow you to attach the Bixpy Motor to your paddle Board or kayak within minutes. Make sure that...
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors)
Bixpy
$69.00
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors)
If you own a personal watercraft and would like to motorize it, you
Hobie® Twist & Stow Rudder Adapter (K-1 and J-2 Motors)
Bixpy
$69.00
No holes, no kayak modifications and simple Plug and Play installation! The Hobie® Twist & Stow Rudder Adapter replaces your Hobie® rudder with a Bixpy Rudder and enable you to attach...
Vertical Pipe for K-1 and J-2 Adapters
Bixpy
$129.00
This Vertical Pipe comes in a 24" size that will fit both Universal Kayak Adapter and Power Pole Adapter. Size is measured from the very top of the adapter to the very bottom of the...
Bixpy Moose Horn (K-1 & J-2 Motors)
Bixpy
$19.99
Bixpy Moose Horn (K-1 & J-2 Motors)
SKU: SP-SMH-2110