RAM Mounting Systems

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball...

RAM Handlebar/Rail Mount f/Garmin Montana® SeriesIncluded is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter. This RAM high strength composite cradle is designed to...

RAM Flat Surface Waterproof Mount f/Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana...

RAM Cradle Holder for Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana...

RAM Cradle Holder for the Garmin Rino 610, 650 & 655t This RAM high strength composite cradle is designed to hold the following devices: Garmin Rino 610 Garmin Rino 650 Garmin Rino 655t...

2" x 2.5" Diameter Base w/1" BallThe RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This...

RAM Base & Ball w/Garmin Mounting HardwareRAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled...

RAM Base & Ball w/Garmin Mounting HardwareThe RAM-B-202-G2U, marine grade aluminum base, consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has a three hole...

Double Socket Arm with Two 2.5 Inch Round BasesThe RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1...

RAM 1 Inch Ball with 1/4-20 Stud for Cameras The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches...

RAM Flat Surface Mount w/Cradle for Garmin dēzl GPSRAM Cradle Holder for the Garmin dēzl 560LMT & 560LT:This RAM high strength composite cradle is designed to hold the following devices: ...

RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball & Hardware for Garmin's echo™ 200, 500c & 550c The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5"...

RAM Cradle Holder for the Garmin dezl 560LMT & 560LTThis RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to...

RAM Short Double Socket Arm for 1" Ball BasesThe RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite...

RAM 5 Place Rod Mounting Base w/Post Get the most out of the space available on your kayak or boat with the RAM Five Spot Mount. With five locations to use for anything from rod holders to GPS to...

RAM Flat Surface Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stcDescription:The RAM-B-138-GA41U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double...

RAM ATV/UTV Strap Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stcDescription:The RAM-B-149Z-2-GA41U consists of a steel strap base, u-bolt bases, double socket, diamond adapter...

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stcThe RAM-B-149Z-GA41 consists of a double socket arm, zinc coated u-bolt base,...

RAM Composite Twist Lock Suction Cup Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc The RAP-B-166-2-GA41U consists of a double socket arm, suction cup twist lock base, diamond...