null
RAM Mounting Systems

RAM Mount No-Drill Laptop Mount f/Chevrolet 2500 C/K, 3500 C/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon [RAM-VB-102-SW1]

(No reviews yet) Write a Review
SKU:
CWR-44057
UPC:
793442901249
MPN:
4369
Weight:
17.75 LBS
Shipping:
Calculated at Checkout
  • RAM Mount No-Drill Laptop Mount f\/Chevrolet 2500 C\/K, 3500 C\/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon [RAM-VB-102-SW1]
  • RAM Mount No-Drill Laptop Mount f\/Chevrolet 2500 C\/K, 3500 C\/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon [RAM-VB-102-SW1]
  • RAM Mount No-Drill Laptop Mount f\/Chevrolet 2500 C\/K, 3500 C\/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon [RAM-VB-102-SW1]
MSRP: $347.49
$326.49
— You save $21.00

Out of stock Call for availability

Description

No-Drill Laptop Mount for the Chevrolet 2500 C/K, 3500 C/K, Silverado, Suburban, Tahoe, GMC Sierra & Yukon
Part #: RAM-VB-102-SW1

Compatible Vehicles:

  • Chevrolet 2500 C/K (2000-2006)
  • Chevrolet 3500 C/K (2000-2006)
  • Chevrolet Silverado (1999-2006)
  • Chevrolet Suburban (2000-2006)
  • Chevrolet Tahoe (2000-2006)
  • GMC Sierra Truck (2000-2006)
  • GMC Yukon (2000-2006)


This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Placement of Mount:
Passenger side floor board, in front of seat

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket

Material:
High Strength Composite and Powder Coated Steel

Notes:
Angled step moves mount away from passenger leg space. There are a total of 3 pieces of steel that make this part, 2 are welded together and the 3rd is bolted. Base will not interfere with factory installed console or 4WD lever.


Owner's Manual (pdf)
View AllClose