null

Bonafide XTR140P Pedal Fishing Kayak (Without Pedal Drive)

SKU:
BRXTR14
Weight:
170.00 LBS
Shipping:
$399.00 (Fixed Shipping Cost)
NOTE:
Please note this item is oversized and actual shipping charges may vary depending on your location.
  • Bonafide XTR140P Blackwater Blue
  • Bonafide XTR140P Camo
  • Bonafide XTR140P Steel
  • Bonafide XTR140P Top Gun Grey
  • Bonafide XTR140P lifestyle
  • Bonafide XTR140P color options
  • Bonafide XTR140P feature diagram

Pre-order: expected to ship 15th Jan 2027

$3,599.00
Frequently bought together:

Description

Pre-order: Expected to ship January 15, 2027. This listing is for the Bonafide XTR140P kayak only. The patented XRange™ Pedal Drive is not included and may appear in product photos.

The XTR140P is the first XTR kayak Bonafide built around a pedal drive, on the most stable platform the company has put on the water. It is set up for all-day stand-up fishing: an open, walkable deck, plenty of casting room, and a patent-pending standing platform that stays planted whether you are sight-casting or fighting a fish on your feet.

A refined, low-drag hull is designed to work with a pedal drive or a motor, so you spend less energy fighting the boat. The elevated bow helps keep the ride drier in chop, and the shallow draft can take you into water that bigger boats cannot use. At 14 feet long and 40 inches wide, it is built for lakes, rivers, flats, and open bays, with a 725 lb capacity and rigging that can go from solo sight fishing to a tandem seat setup.

The XRange™ Pedal Drive (sold separately) stows on deck and deploys in seconds with no extra rigging, or comes off the boat entirely for a clean motor platform with no drive left on deck. Two dedicated stow positions are designed so the drive does not take over your fishing space. Use the pedals to move in quietly, hold on a school, or fight a fish without putting the rod down.

On board you will find PowerLink ports for electronics, multiple motor-mount options, extensive gear tracks with grab rails, and a Pivot Pro swivel seat.

Features

  1. Open-water hull designed for tough conditions
  2. High stability and forward capacity for standing on deck
  3. Efficiency-optimized hull for pedal and motor drives
  4. Built for the patented XRange™ Pedal Drive with remote steering and two storage options (pedal drive sold separately)
  5. Integrated SpringBlade rudder system
  6. Pivot Pro swivel seat on a 42" adjustable track
  7. 24" x 80" open, walkable floor plan
  8. 22" x 33" wide upper-deck standing platform (patent pending)
  9. High-volume 24" x 15" x 9" below-deck storage
  10. Under-deck platform storage location for the XRange™ drive
  11. Long-term XRange™ storage at the stern
  12. Midship grab-rail system for drop-in sonar, rigging, and rod storage
  13. Multiple transducer mounting options at the midship scupper and stern
  14. Multiple monitor mount locations at the side rail and forward deck
  15. PowerLink install locations for electronics rigging at the bow, midship, and stern
  16. 13" x 15" gasketed bow hatch with internal storage, built to shed waves
  17. 14 oversized drainage scuppers for rough conditions
  18. Foot-steering capable for stern motors
  19. Hand steering integrated for the pedal drive
  20. Convertible to a tandem angler setup with a Pivot Pro swivel seat

Specifications

Length 14' 0" / 426.7 cm
Width 40" / 101.6 cm
Depth at Beam 18" / 45.7 cm
Capacity* 725 lbs / 328.9 kg
Fitted Hull Weight 170 lbs / 77.1 kg
Fully Rigged Weight 185 lbs / 83.9 kg

*Capacity is kayak weight + paddler weight + gear weight. Bonafide rates capacity at the point where performance becomes significantly diminished.

Bonafide XTR140P color options: Camo, Blackwater Blue, Steel, and Top Gun Grey

*Images are renderings. Color will vary slightly.

Bonafide XTR140P feature callout diagram

Angler with a bass on a Bonafide XTR140P kayak

View AllClose