Foiling gear

Extra brass T-nuts for your tracked hydrofoil sold each.  These are salt water approved and perfect for all track systems.  They are M8 standard metric threads which is the convention for most hydrofoil tracks.  These are sold per each.  If you have a...

The day wall foilboard bags are specifically designed to accommodate the needs of growing foiling audience to protect their gear from accidental dings and daily wear. The bags are coffin-style with side walls featuring 6mm padding designed with necessary...

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  The low profile t nuts can be used in some foils that use M6 t-nuts as they are the same low profile. ...

This is a full set of replacement hardware for the Armstrong system (4 complete T-nuts, 25mm M6 bolts, and custom washers).  Everything is stainless steel instead of the titanium made by Armstrong.  This hardware is as strong or stronger than Armstrong...

600D nylon ripstop shell offering abrasion and tear protection. Board Size Ranges: Small = up to 5'6", Medium = up to 6'4", Large = up to 6'8", XLarge = up to 7'6"  WHY WE MADE IT We wanted bags that would fit a wide range of foil boards and...

New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner than the original FoilMount.  This setup weighs just over 1lb so it is also...

Use any size Slingshot mast with your Sabfoil setup.  All Slingshot short masts 15", 24", 28", and full length 35.4" kite mast, will work with this system. The aluminum anodized shim attaches to the Slingshot mast with 2 titanium M8 bolts...

The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings. It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be...

The Flying Fish V2 is your ticket to prone, wing, kite, wake, and tow-in foiling. The ample width makes getting up and going easy while the durable EPS foam core can take a thrashing. Both Y-strap and offset front foot options allow you to tailor the...

Find your personal comfort zone. The ability to adjust your wing position fore or aft in relationship to your stance is critical in balancing your…  

These are Replacement M6 Stainless Steel T-nuts for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold each so if you need a set of 4 make sure to buy...

2021 Takuma Kujira Helium 1750 Foil Set Lightweight, versatile and robust ONE FOIL FITS ALL: BEGINNER, INTERMEDIATE TO FREERIDE EXPERT The Kujira Helium 1750cm2 front wing and 218cm2 back wing is a real game-changer for new foilers, seasoned riders, and...

How to make a great product better? Well, we have done it!  The 2023 Minimalist Wing Foil Harness is loaded with some impressive, new features taking the Minimalist to a new levell! Quality material & craftsmanship!  MADE IN HOOD...

User Instructions: Be sure to use a Metric 6mm fin-bolt. Be cautious not to cross-thread the fin-bolt Be sure to get a least 12 complete turns into the PowerPlate. (Max # of turns is 16 or 3/4"). You may need a longer screw. Be certain to tighten the...

WF-1 FOIL BOARD ONLY 4'6     A modified version of one of our performance wakesurfers, the WF-1 board features a track mount for surfing, pumping, carving and long-lining on-foil, and a two-fin configuration for use as a standard surfer  ...

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

FCS II keyless quad fin set, comes with two symmetrical inside fins and two outside fins.Includes: 4 x 3.9" (9.9cm) Small Size Carver FCS II FinsStock fin set included with Model Year 2016 - current Gnarwhal and Gnarwhal XR wakesurfers. Also compatible...

NEW/ 2021 New foil range  For all sorts of foil acitivities HARD FACTS/ Fo all disciplines, surf, stand up paddle, wing foil or surf foil  Four sizes 60/70/80/90 for riders to jump from one length to another Parts available for board...

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

Single (1) strap. Comes with 20mm long M6 self-tapping wood screw set and hardware. 20mm long M6 self-tapping wood screws are compatible with all directional boards, windsurf boards + Hover boards (exception of Hover Kite 130 + Hover Kite 160 which take...