RAM Mounting Systems

The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ can be clamped on rails from...

Double Suction Cup BaseRAM suction cups are regarded as one of the most impressive suction cups inthe world. The incredible holding power is surprising when considering howmost suction cups...

RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large TabletsThe RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod,...

Compatible Vehicles:Chevrolet Silverado (2014)Placement of Mount:Across Transmission HumpDrilling Requirements:No - uses existing console bolts on vehiclesSeat Configuration:Bucket/Bench. Base will...

12" Long Lower Female Tele-PoleThe RAM Tele-Pole 12" tall female tube base has a square plate base that will connect to many of the RAM-VB No-Drill™ and Drill plate bases, as well as...

Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short ArmThe RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter...

1" Track Ball w/ T-Bolt AttachementDesigned to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including...

1.5" Track Ball w/ T-Bolt AttachementDesigned to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including...

RAM-ROD 2007 Fishing Rod Holder with Single Socket for 1.5" Diameter Ball Bases The RAP-340NB consists of the RAM-ROD 2007 rod holder and single socket for 1.5" diameter ball bases. Ideally suited...

RAM Mount RAM-ROD 1" Ball f/RAM 5 Spot Mounting BaseBall Size: 1" Rubber BallColor: BlackMaterial: High Strength Composite

RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System (No Base) Unlike anything you've seen before, and performance beyond your expectations describes another great product...

RAM 6.25" X 2" Rectangle Base with 1" BallThe RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled...

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern)The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern...

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge CasesThe RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy...

RAM 1.5" x 3" Rectangle Base with 1.5" BallThe RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at...

RAM 2" x 2" Square Base with 1.5" BallThe RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the...

RAM 2" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at...

RAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 SeriesThe RAM-107BU is a marine grade aluminum base with 1.5"...

RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket ArmThe RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm...