Foil Spare Parts

Extra brass T-nuts for your tracked hydrofoil sold each.  These are salt water approved and perfect for all track systems.  They are M8 standard metric threads which is the convention for most hydrofoil tracks.  These are sold per each.  If you have a...

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  The low profile t nuts can be used in some foils that use M6 t-nuts as they are the same low profile. ...

Use any size Slingshot mast with your Sabfoil setup.  All Slingshot short masts 15", 24", 28", and full length 35.4" kite mast, will work with this system. The aluminum anodized shim attaches to the Slingshot mast with 2 titanium M8 bolts...

This is a full set of replacement hardware for the Armstrong system (4 complete T-nuts, 25mm M6 bolts, and custom washers).  Everything is stainless steel instead of the titanium made by Armstrong.  This hardware is as strong or stronger than Armstrong...

New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner than the original FoilMount.  This setup weighs just over 1lb so it is also...

NEW/ 2021 New foil range  For all sorts of foil acitivities HARD FACTS/ Fo all disciplines, surf, stand up paddle, wing foil or surf foil  Four sizes 60/70/80/90 for riders to jump from one length to another Parts available for board...

The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings. It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be...

The Kujira 750cm2 front wing is designed for expert riders who are looking for performance and speed in serious conditions. It delivers an insane level of maneuverability perfectly suited for prone foiling. With intense carving potential it allows you to...

These are Replacement M6 Stainless Steel T-nuts for the any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold each so if you need a set of 4 make sure to buy...

2021 Takuma Kujira Helium 1750 Foil Set Lightweight, versatile and robust ONE FOIL FITS ALL: BEGINNER, INTERMEDIATE TO FREERIDE EXPERT The Kujira Helium 1750cm2 front wing and 218cm2 back wing is a real game-changer for new foilers, seasoned riders, and...

How to make a great product better? Well, we have done it!  The 2023 Minimalist Wing Foil Harness is loaded with some impressive, new features taking the Minimalist to a new levell! Quality material & craftsmanship!  MADE IN HOOD...

User Instructions: Be sure to use a Metric 6mm fin-bolt. Be cautious not to cross-thread the fin-bolt Be sure to get a least 12 complete turns into the PowerPlate. (Max # of turns is 16 or 3/4"). You may need a longer screw. Be certain to tighten the...

These are M6 diameter 316 Stainless Steel T-bolts to be used with the wizard hat hardware set in various sizes.  These come in sets of 4 in each pack.  They are measured from the extreme bottom to the extreme top of the bolt.

The Naish C55 monocoque composite mast is an innovative piece of engineering that provides a state-of-the-art combination of affordability and performance. Its advanced construction includes a dual expanding foam core, which helps to reduce the weight...

SPEED + CONTROL The MACH 1 foil range is designed to provide the highest level of speed and control to wing foilers, but is also an ideal kite, windsurf and surf foil. Drawing inspiration from the Wind/Wing HA 914, this series features extra thin, very...

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

FCS II keyless quad fin set, comes with two symmetrical inside fins and two outside fins.Includes: 4 x 3.9" (9.9cm) Small Size Carver FCS II FinsStock fin set included with Model Year 2016 - current Gnarwhal and Gnarwhal XR wakesurfers. Also compatible...

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

The Mast Top Plate enables to connect the F-ONE aluminium masts to all boards featuring a twin track system (the lateral spacing between the tracks must be 90mm). It is made of aluminium 6061, CNC machined with high precision and fully...

Another 1st from NSI! The Wind Ding(Free) hook replaces your overkill spreader bar with a smaller and smoother hook that will keep your board and pads ding free. Pro version protrudes 1/2" further than our standard version and the hook is 1/4" deeper...