Marine Electronics Mounts

Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal BracketsThe RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design...

RAM® Composite Universal Marine Electronic MountThe RAP-B-111U consists of a 2" x 2.5" rectangle base, STANDARD length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal AMPS hole...

RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ BaseThe RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains...

RAM Large Cable Manager f/2.25" Diameter Ball BasesThe RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of...

RAM 1.5" Ball Mount with Track Ball™ Base & 2" x 4" Plate for the Humminbird Helix 7 ONLYThe RAM-202-24-354-TRA1U consists of a double socket arm mount, Track Ball™ base and 2" x 4" rectangular plate. The unique...

RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling...

Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for...

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled...

1" Diameter Ball Mount w/Short Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern)The RAM-B-111U-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains...

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6...

Fishfinder Mount for Lowrance Hook2 Series - 1" Track MountDesigned for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts...

RAM 1" Diameter Ball Mount with 6.25" X 2" Rectangle Base & 2.5" Round Base The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2"...

RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round BaseThe RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled...

RAM Quick Release Adapter with 1" Diameter Ball for "LIGHT USE" Lowrance Elite-4 & Mark-4 Series FishfindersThe RAM adapter base includes a 1" diameter rubber ball and inserts directly to the back of Lowrance Elite 4 and Mark-4 Fishfinders. The adapter...

RAM 1" Ball Mount with Track Ball™ Base & 1.5" x 3" Plate for the Humminbird Helix 5 ONLYThe RAP-B-202-153-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 1.5" x 3" rectangular plate. The...

Surface Mount for Humminbird HELIX 7The RAM-202-24-202U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. Rubber...

Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2"...

RAM Mount w/3" x 11" Base & Short ArmsPart #: RAM-E-111U-DThe included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your...

1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series FishfindersThe RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts...

1" Ball "Light Use" Flat Surface Mount f/Raymarine DragonflyThe RAM-B-101-RYM1 consists of (2 quantity) 2.5" diameter round bases that contains the universal AMPS hole pattern and standard length double socket arm. Included are (3 quantity) (#8-32 x...