RAM Mounting Systems

RAM 3" Diameter Suction Cup w/1" Plastic BallPart #: RAP-B224-2UColor: BlackBall Size: 1" Material:: High Strength Composite

RAM 3.25" Diameter Suction Cup Twist Lock Base with 1" Ball Part #: RAM-B-224-1UThe RAM-B-224-1U consists of a 3.25" twist lock suction cup base that is connected to the diamond base with 1" rubber...

RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base Part #: RAM-B-316-1-238U The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18"...

RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base Part #: RAM-B-316-1U The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to...

Yoke Clamp Base w/X-Grip IIPart #: RAM-B-121-UN8BThe yoke clamp base will fit rails in diameter from 0.625" to a maximum of1.25". The 1" rubber ball is at a right angle to the plane of the...

RAM Mount POD I No-Drill Vehicle Mount w/X-Grip IIPart #: RAM-B-316-1-UN8U Consists of the universal spring loaded X-Grip II holder and RAM POD I universal No-Drill vehicle mount. The base of the...

Suction Cup Twist Lock Base Mount w/X-Grip IIPart #: RAM-B-166-UN8U Consists of the universal spring loaded X-Grip II? holder, socket system and 3.25" suction cup twist lock base. The suction cup...

RAM X-Grip IIPart #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II...

RAM Double 1-1/2" Ball AdapterPart #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade...

Compatible Vehicles:Freightliner TrucksInternational TrucksKenworth TrucksMack TrucksPeterbilt TrucksVolvo Trucks Placement of Mount:Passenger side on the floor, under front seat Drilling...

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used...

RAM Double 1" Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball...

RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square...

RAM Handlebar/Rail Mount f/Garmin Montana® SeriesIncluded is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter. This RAM high strength composite cradle is designed to...

RAM Flat Surface Waterproof Mount f/Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana...

RAM Cradle Holder for Garmin Montana® SeriesThis RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana...

Universal Yoke ClampBoth strong and light weight, the RAP-B-121BU clamping base is perfect for numerous electronic devices. Modular in design, switch out the clamps for a perfect fit no matter what...

2" x 2.5" Diameter Base w/1" BallThe RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This...

RAM Yoke Clamp Mount with Double Socket Arm and Round Base Adapter The RAM-B-121-202U consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp...

RAM Yoke Clamp Base with 1" Rubber Ball The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when...