Bixpy
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors)
- SKU:
- AC-3MP-2402
- MPN:
- 51920
- Weight:
- 3.00 LBS
- Shipping:
- Calculated at Checkout
Description
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors)
If you own a personal watercraft and would like to motorize it, you now have the perfect companion: the Peel & Bond Fin Box Adapter.
This adapter is perfect for watercraft that are difficult/otherwise impossible to motorize. You can bond this fin box adapter on any flat surface somewhere on the bottom of the watercraft. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy Motor onto your newly installed fin box.
* Motors shown in the pictures above are not included in the adapter kit
FEATURES & SPECIFICATIONS:
Easily attached to flat surfaces using 3M VHB adhesive
- Motor draft: 6" (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
INCLUDES:
Peel & Bond Fin Box - Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
Related Products
US Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the Bixpy Motor to your Paddle Board or Kayak within minutes. Make sure that you are getting the...
DIY Fin Adapter for Inflatables (K-1 and J-2 Motors)
Bixpy
$69.00
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for...
Flip & Lock Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a Flip & Lock Fin Box, this Adapter will allow you to attach the Bixpy Motor to your paddle Board or kayak within minutes. Make sure that...
Slide & Lock Fin (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the Bixpy Motor to your Paddle Board or Kayak within minutes...
Transom Adapter (K-1 and J-2 Motors)
Bixpy
$169.00
With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal...
Universal Kayak Adapter (K-1 and J-2 Motors)
Bixpy
$149.00
With the Universal Kayak Adapter, you can attach your Bixpy K-1 or J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and...
Hobie® Twist & Stow Rudder Adapter (K-1 and J-2 Motors)
Bixpy
$59.00
No holes, no kayak modifications and simple Plug and Play installation! The Hobie® Twist & Stow Rudder Adapter replaces your Hobie® rudder with a Bixpy Rudder and enable you to attach...
Vertical Pipe for K-1 and J-2 Adapters
Bixpy
$89.00
This Vertical Pipe comes in a 24" size that will fit both Universal Kayak Adapter and Power Pole Adapter. Size is measured from the very top of the adapter to the very bottom of the...
Low Profile - THRUHULL™ PEDAL DRIVE ADAPTER (K-1 or J-2 Motors)
Bixpy
$179.00
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take...