Bixpy
DIY (Do It Yourself) ThruHull™ POD Adapter (J-2 Motors)
(No reviews yet)
Write a Review
- SKU:
- AT-POD-2103
- MPN:
- 38016
- Weight:
- 1.50 LBS
- Shipping:
- Calculated at Checkout
Description
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
FEATURES
- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Dry pod not included
- Motor shield to protect the motor in case of accidental collision with bottom
INCLUDES
- DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware
ADDITIONAL INFORMATION
- Motor draft: 10" (25 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Marine grade stainless steel components for salt water or fresh water use
- If you require a reduced shroud to inserts , click here to add one to your cart
INSTALLATION GUIDES
* Pods and Motors shown in pictures not included in the Adapter Kits.
Related Products
ThruHull™ Pod Adapter - Feelfree Kayaks (J-2 Motors)
Bixpy
$249.00
No drilling. No holes. No hassle! The ThruHull™ Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds. The adapter comes with the original Feelfree pod,...
ThruHull™ Pod Adapter - Bonafide Kayaks (J-2 Motors)
Bixpy
$249.00
No drilling. No holes. No hassle! The ThruHull™ Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds. The adapter comes with the original Bonafide Dry...
Low Profile - THRUHULL™ PEDAL DRIVE ADAPTER (K-1 or J-2 Motors)
Bixpy
$179.00
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take...
DIY Fin Adapter for Inflatables (K-1 and J-2 Motors)
Bixpy
$69.00
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for...
Transom Adapter (K-1 and J-2 Motors)
Bixpy
$169.00
With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal...
US Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the Bixpy Motor to your Paddle Board or Kayak within minutes. Make sure that you are getting the...
Universal Kayak Adapter (K-1 and J-2 Motors)
Bixpy
$149.00
With the Universal Kayak Adapter, you can attach your Bixpy K-1 or J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and...
Flip & Lock Fin Adapter (K-1 and J-2 Motors)
Bixpy
$35.00
If your paddle board or kayak has a Flip & Lock Fin Box, this Adapter will allow you to attach the Bixpy Motor to your paddle Board or kayak within minutes. Make sure that...
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors)
Bixpy
$69.00
Peel & Bond Fin Box Adapter (K-1 & J-2 Motors) If you own a personal watercraft and would like to motorize it, you