Description
Another 1st from NSI! The Wind Ding(Free) Spreader Bar replaces your overkill metal spreader bar with a smaller and smoother hook that will keep your board and pads ding free. The smaller profile and rounded tip slides over your pads and is much less likely to damage your board when popping up or during an unexpected spill.
- Compact yet stout design holds up in the toughest conditions- tested in 40mph+ winds!
- Slotted design allows for sliding to the side when paddling and riding or whenever you just want it out of the way.
- 3 sizes available: 8", 10" and 12" lengths
The 2" wide version of our popular Wing Ding (Free) Hook used on our Minimalist Harnesses but adapted to work with your wind or kite harness. Updated design with increased depth and hook keeps your harness line in even if your wrist leash gets caught. Incorporates smoother beveling in key areas for easier folding over when paddling and less chance of spearing your board during a crash. If sliding the hook isn’t your thing this setup will easily fold over itself and lay flat while lying on your board without causing damage to board or pads.
3 sizes to choose from: 8", 10" and 12" lengths. We suggest going with the longest size that will fit your harness. Adjust your straps to near fully widened and measure the distance between each side. Allow some adjustment for additional tightening after mounting the spreader bar. Select the largest size you can without choosing a spreader bar wider than your measurement. Also, make sure the harness is adjusted for your waist.
If the measurement is more than 12.5” choose a 12" spreader bar.
If it is 10.5-12” choose a 10” spreader bar.
If it is 10.5” or less choose an 8” spreader bar.
If the measurement is more than 12.5” choose a 12" spreader bar.
If it is 10.5-12” choose a 10” spreader bar.
If it is 10.5” or less choose an 8” spreader bar.
Make sure to check your harness to see if this style of attachment will work for you. If you have webbing loops or metal hooks it should work with your setup. If your harness uses ratcheting straps or cam locks to secure the spreader bar you may need to do some additional fabrication. Email us with a pic of your harness if you need help deciding if this will work for you.
If your harness uses webbing to secure its spreader bar:
1. Undo the loops and remove the stock spreader bar.
2. Adjust the harness for your waist
3. Measure from where the spreader bar webbing exits the sides and subtract 1" to allow for adjustment.
If this is more than 12.5” choose a 12" spreader bar.
If it is 10.5-12” choose a 10” spreader bar.
If it is 10.5” or less choose an 8” spreader bar.
General Sizing:
XS & SM - 8in bar
MED & LRG - 10in Bar
Some LRG and XL - 12in Bar
If your harness uses webbing to secure its spreader bar:
1. Undo the loops and remove the stock spreader bar.
2. Adjust the harness for your waist
3. Measure from where the spreader bar webbing exits the sides and subtract 1" to allow for adjustment.
If this is more than 12.5” choose a 12" spreader bar.
If it is 10.5-12” choose a 10” spreader bar.
If it is 10.5” or less choose an 8” spreader bar.
General Sizing:
XS & SM - 8in bar
MED & LRG - 10in Bar
Some LRG and XL - 12in Bar
Now with Stainless Steel HD Loops!
Specs & Dimensions:
- Protrudes 3-1/8" x 3" tall x 3/4" thick
- 3/8" Hook radius allows for easy hooking in and out
- 8", 10", or 12" length harnesses available
- 2" webbing keeps the hook where you need it
- Hook and Spreader Bar proudly made in The Gorge - Hood River, OR
Related Products
Spreader Bar Windsurf Spectre
ION
$139.00
The SPECTRE-Bar is ION's latest innovation in spreader bar technology. It features a slim outline and is made from forged carbon C30 which makes it also incredibly light. Thanks to the bar's stiff...
On Sale
Unity Windsurf Spreader Bar
Ride Engine
Now:
$124.99
Was:
$132.00
Ride Engine harnesses offer a best-in-class fit with unrivaled comfort and performance, and with this classic windsurfing hook you can reap all these benefits, lengthening your time on the water...
Spreader Bar for Surfski (yoke)
Epic Kayaks
$8.80
Metal yoke that holds the understern rudder in place on an Epic surfski. This is what your rudder lines attach to.
On Sale
Unity Kite Spreader Bar
Ride Engine
Now:
$124.99
Was:
$132.00
A fixed hook offers the most direct connection to you and the kite, and now—when coupled with the innovative design of the Unity Spreader Bar—offers unparalleled feel and feedback. If you’re reaching...
Unity Kite Mega Spreader Bar
Ride Engine
$144.00
A fixed hook offers the most direct connection to you and the kite, and now—when coupled with the innovative design of the Unity Spreader Bar—offers unparalleled feel and feedback. If you’re reaching...