2019 Naish KS 2 Back Wing

2019 Naish KS 2 Rear Wing The KS 2 Rear Wing is designed for the 2019 Naish Kite foil sets and features and adjustable back wing stabilizer.

2019 Naish Thrust WS 2 Back Wing

2019 Naish Thrust WS 2 Back Wing The Naish Thrust WS 2 features a Carbon/Glass back wing construction and pairs with the WS 1 Front Wing.

Hover Glide 46cm Mast

46 cm (18 in.) Aluminum replacement mast for all Slingshot Hover Glide foilsMast is easily mounted to the Hover Glide's stock pedestal and foil assembly for quick on-the-fly change-out.   

FCS II QUAD FIN SET WAKESURFER

FCS II keyless quad fin set, comes with two symmetrical inside fins and two outside fins.Includes: 4 x 3.9" (9.9cm) Small Size Carver FCS II FinsStock fin set included with Model Year 2016 - current Gnarwhal and Gnarwhal XR wakesurfers. Also compatible...

HOVER GLIDE FOIL PEDESTAL (4 Bolt Plate)

Aluminum Pedestal/top plate for Hover Glide Foil HARDWARE NOT INCLUDED        

Hover Glide 61cm Mast

24" aluminum mast for Slingshot's Hover Glide foil and Foiling Flight School program. Mast can be purchased individually or as a discounted package. The 24" mast is the "Touch-and-Go" stage of Foiling Flight School. It is an invaluable tool in the...

Hover Glide 71cm Mast

STORE     30" aluminum mast for Slingshot's Hover Glide foil and Foiling Flight School program. Mast can be purchased individually or as a discounted package. The 30" mast is the "Solo" phase of Foiling Flight School and is the final step of...

HOVER GLIDE STANDARD FUSE 61CM

Hoverglide Standard Fuse 61 cm Hover Glide foil fuselage for kite and wake foils. The standard 61 cm is designed for Slingshot's FKITE kite foil and FWAKE wake foil. Product is also compatible with the Slingshot Hover Glide modular system and all Hover...

SWITCH FUSE SHORT

Switch Fuse Short (610mm)Find your personal comfort zone.  The ability to adjust your wing position fore or aft in relationship to your stance is critical in balancing your rig, stance and overall sailing position.  Slingshot's patent pending...

F-One Alu Mast 45cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

F-One Alu Mast 55cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

Hover Glide 90 cm Mast

90 cm (35.5 in.) Aluminum replacement mast for all Slingshot Hover Glide foils.

F-One Alu Mast 65cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

F-One Alu Mast 75cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

F-One Alu Mast 85cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

F-One Alu Mast 95cm

The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling...

F-One Titan Mast Foot

The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings. It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be...

Foil Mount Standard

The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have.  The FoilMount uses a specially designed 3M adhesive tape to stick to the bottom of your board...

FoilMount 3.0 Carbon

New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner than the original FoilMount.  This setup weighs just over 1lb so it is also...

Foil Mount Ridge Mount

The FoilMount is a universal hydrofoil mounting system, this means that you can put a hydrofoil track on just about any board you already have. Just Stick and Ride! The FoilMount uses a specially designed 3M adhesive tape to stick to the bottom of...

Stab C300 Surf

Stab C300 Surf Designed specifically for carving and surfing the C300SURF stabilizer will transform your foiling experience. Its shape makes it easier to roll the foil in the turns and to go from rail to rail. Expect sharper turns and a looser feel...

2019 Naish Thrust WS 1 Front Wing

2019 Naish Thrust WS 1 Front Wing The Naish foils this season see a lighter front wing design paired with a face lift. The WS 1 will pair perfectly with the WS 2 back wing and is an all-around freeride foil for the windsurfers out there. What Naish has...

Arc Wing 68cm

The Arc wing is designed for proficient foilers who are ready to take on larger waves and higher speeds, or for towing into (and keeping up with) rolling swell out past the break. Add this along with the Futura Surf Package (Manta 76 wing) and...

F-One Four Bolt Top Plate

The Mast Top Plate enables to connect the F-ONE aluminium masts to all boards featuring a twin track system (the lateral spacing between the tracks must be 90mm). It is made of aluminium 6061, CNC machined with high precision and fully...

F-One Tuttle box Top Plate

The Mast Top Plate enables to connect the F-ONE aluminium masts to all boards featuring a twin track system (the lateral spacing between the tracks must be 90mm). It is made of aluminium 6061, CNC machined with high precision and fully...

PowerPlate Windsurf Foil Adapter

User Instructions: Be sure to use a Metric 6mm fin-bolt. Be cautious not to cross-thread the fin-bolt Be sure to get a least 12 complete turns into the PowerPlate. (Max # of turns is 16 or 3/4"). You may need a longer screw. Be certain to tighten the...

Rear Stabilizer Wing 42cm

42 cm Rear Stabilizer Wing for Futura Carbon Foils

S25 Jet HA 310 High Aspect Stabilizer

The new HA stabilizers emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response for pumping.