AquaBanas Splash Bana

The AquaBanas Splash Bana is great for families with small children. The netted hole in the middle is 5' in diameter and 6" deep. It allows children to splash around while the adults enjoy the sun. All AquaBanas are designed for tents to easily connect to them if shade is desired!

 The Splash Bana allows up to 8 people to sit or lay comfortably on the deck. The center hole is netted so kids and adults can splash safely without falling through. Add another Bana deck or Bana Tent to enhance the experience. The Splash Bana is 11 ft x 11 ft x 8 inches. The Splash Bana weighs about 140 pounds. Electric pump is sold separately.

Features

☑ Bana-Grip Non-Slip surface
☑ Ballast bags for unrivaled stability
☑ Quick Step for easy boarding from the water
☑ Drop stitch construction to maintain item shape and provide stability
☑ Hot wielded vs glued for best in class durability
☑ Anchor and moor points underneath
☑ Velcro flaps to connect banas for Unlimited modularity and customization

Specs

☑ Inflated Dimensions: 11' x 11' x 8" | 340 x 340 x 20cm
☑ Packed Dimensions: 46" x 30" x 14" | 117 x 76 x 36cm
☑ Weight: 138 lbs | 63 kg

Includes

☑ Splash Bana

How AquaBanas Work

AquaBanas have a modular design that allow them to operate as a single unit or to be seamlessly connected together to form larger Bana Systems. There are 3 Foundation Banas that are instrumental in creating an AquaBanas system:

STANDARD FEATURES:
☑ Inflated Back Rests
☑ Gator Mouth Flaps
☑ Anchor Rings For Tent
☑ Non-Slip Top Surface
☑ Quick-Step Access
☑ Stable Ballast Bags
☑ Dual Inflation Valves
☑ Netted Footwells
☑ Rock Solid Table
☑ Cooler Cut-Out

All AquaBanas decks and components use a standardized connection system that has (2) D-Rings located 80” apart. Each set of these D-Rings features a 120” wide Gator Mouth flap that firmly holds a non-slip Gap Cap material that prevents anyone from stepping through the butted seam. The decks are held together primarily with (2) chains of #316 Stainless Steel Quick Link connectors connected to the rings. The chains are then covered with a wrap.

Welded Construction

All AquaBanas products are built to the highest commercial inflatable standards including full welding of all drop stitch products. Welded seams eliminate any possibility of seam failure that many drop stitch products are prone to.
Also, an additional layer of vinyl material is added to every seam, along with our trim strip material for added strength.

OPTIONAL EXTRA 

Bravo 2000 is a dual motor pump that puts out 2000 liters of air per minute and can generate 5psi of air pressure. 2 meter hose (Available in 120v or 230v)

How to set up?

*Because these are highly specialized products and will sell out, the manufacturer does not accept returns*

Please see Aquabanas FAQs here