null
AquaBanas

AquaBanas POP 3 Pool Yacht

(No reviews yet) Write a Review
SKU:
6.73334E+12
MPN:
44718
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
  • AquaBanas POP 3 Pool Yacht
$17,899.00

Description

The POP 3 Pool is also a foundation piece for waterfront AquaBanas Systems. The design allows the pool frame to be used to support AquaBanas decks on yachts for many different uses including sun and shade areas with the many optional banas and tents. The netting can help protect from sea creators and jellyfish.

“This is so much easier to handle than any other seapool on the market! Period!” 


Deploying and retracting a sea pool from a yacht is very heavy and challenging thing to do. Many of the larger sea pools on the market weigh in excess of 500 pounds, and have netting that creates substantial additional drag as it is being removed from the water. The POP 3 Pool has an innovative design that breaks the pool into 3 manageable parts that can be handled much easier. The pool system can also be stored in separate locations to maximize storage space. The POP 3 Pool is also a foundation piece for waterfront AquaBanas Systems. The design allows the pool frame to be used to support AquaBanas decks on water fronts for many different uses including floating bars and restaurants. The netting becomes optional and is easily removed, or just left off. POP 3 Pools are considered foundation banas and they ship in 5 parts on one pallet including; Pool side A, Pool side B, Removeable Netting, Bravo 2000 Pump and Hose Kit. The weight and dimensions shown are for shipping purposes and could vary with custom size pools.

Features

☑ Bana-Grip Non-Slip

Specs


☑ Tent Weight: 470 lbs
☑ Packed Dimensions: 48" x 40" x 54" |
122 x 102 x 137cm
☑ Inflated Dimensions: 26' x 23' x 7' | 800 x 700 x 275cm

Includes

☑ Inflation Kit and Connection Kits.
NOTE: the Floating Quick Step shown in the image is additional and will not be included with this product.




 

 

 

 


 

 

 

How AquaBanas Work

AquaBanas have a modular design that allow them to operate as a single unit or to be seamlessly connected together to form larger Bana Systems. There are 3 Foundation Banas that are instrumental in creating an AquaBanas system:

STANDARD FEATURES:
☑ Inflated Back Rests
☑ Gator Mouth Flaps
☑ Anchor Rings For Tent
☑ Non-Slip Top Surface
☑ Quick-Step Access
☑ Stable Ballast Bags
☑ Dual Inflation Valves
☑ Netted Footwells
☑ Rock Solid Table
☑ Cooler Cut-Out

All AquaBanas decks and components use a standardized connection system that has (2) D-Rings located 80” apart. Each set of these D-Rings features a 120” wide Gator Mouth flap that firmly holds a non-slip Gap Cap material that prevents anyone from stepping through the butted seam. The decks are held together primarily with (2) chains of #316 Stainless Steel Quick Link connectors connected to the rings. The chains are then covered with a wrap.

Welded Construction

All AquaBanas products are built to the highest commercial inflatable standards including full welding of all drop stitch products. Welded seams eliminate any possibility of seam failure that many drop stitch products are prone to.
Also, an additional layer of vinyl material is added to every seam, along with our trim strip material for added strength.

OPTIONAL EXTRA 

Bravo 2000 is a dual motor pump that puts out 2000 liters of air per minute and can generate 5psi of air pressure. 2 meter hose (Available in 120v or 230v)




How to set up?

*Because these are highly specialized products and will sell out, the manufacturer does not accept returns*

Please see Aquabanas FAQs here 

View AllClose