AquaBanas POP 3 Pool Resort

(No reviews yet) Write a Review
4.00 LBS
$199.00 (Fixed Shipping Cost)
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort
  • AquaBanas POP 3 Pool Resort


The POP 3 Pool is also a foundation piece for waterfront AquaBanas Systems. The design allows the pool frame to be used to support AquaBanas decks on water fronts for many different uses including floating bars and restaurants. The netting becomes optional and is easily removed! 

This POP 3 pool is an awesome frame to create a waterfront restaurant or bar! 

The AquaBanas POP 3 resort pool for over 25 people makes an excellent framework to create a floating bar for many waterfront locations worldwide. Add as many Party Banas and/or loungers to create an area where people can chill on the water all day. Ask us about a custom design to fit your needs. All POP 3 Pools are considered foundation banas and they ship in 5 parts on one pallet including; Pool side A, Pool side B, Removeable Netting, Bravo 2000 Pump amd Hose Kit. The dimensions and weights shown are for shipping purposes. They are subject to change for custom sizes.


☑ Bana-Grip Non-Slip


☑ Tent Weight: 735 lbs
☑ Packed Dimensions: 48" x 40" x 60" |
122 x 102 x 152cm
☑ Inflated Dimensions: 35' x 35' x 7' | 1062 x 1062 x 275cm


☑ Inflation Kit, Connection Kits, and Floating Quick Step






How AquaBanas Work

AquaBanas have a modular design that allow them to operate as a single unit or to be seamlessly connected together to form larger Bana Systems. There are 3 Foundation Banas that are instrumental in creating an AquaBanas system:

☑ Inflated Back Rests
☑ Gator Mouth Flaps
☑ Anchor Rings For Tent
☑ Non-Slip Top Surface
☑ Quick-Step Access
☑ Stable Ballast Bags
☑ Dual Inflation Valves
☑ Netted Footwells
☑ Rock Solid Table
☑ Cooler Cut-Out

All AquaBanas decks and components use a standardized connection system that has (2) D-Rings located 80” apart. Each set of these D-Rings features a 120” wide Gator Mouth flap that firmly holds a non-slip Gap Cap material that prevents anyone from stepping through the butted seam. The decks are held together primarily with (2) chains of #316 Stainless Steel Quick Link connectors connected to the rings. The chains are then covered with a wrap.

Welded Construction

All AquaBanas products are built to the highest commercial inflatable standards including full welding of all drop stitch products. Welded seams eliminate any possibility of seam failure that many drop stitch products are prone to.
Also, an additional layer of vinyl material is added to every seam, along with our trim strip material for added strength.


Bravo 2000 is a dual motor pump that puts out 2000 liters of air per minute and can generate 5psi of air pressure. 2 meter hose (Available in 120v or 230v)

How to set up?

*Because these are highly specialized products and will sell out, the manufacturer does not accept returns*

Please see Aquabanas FAQs here 

View AllClose