null
Starboard

2022 Inflatable Windsurfer 11’2″ x 31+″ iGO

(No reviews yet) Write a Review
SKU:
1.01121E+12
MPN:
39338
Weight:
22.00 LBS
Shipping:
Free Shipping
  • Starboard SUP WINDSURFING
  • Starboard SUP WINDSURFING
  • Starboard SUP WINDSURFING
  • Starboard SUP WINDSURFING
  • 2022 Inflatable Windsurfer 11’2″ x 31+″ iGO
  • 2022 Inflatable Windsurfer 11’2″ x 31+″ iGO
  • 2022 Inflatable Windsurfer 11’2″ x 31+″ iGO
  • 2022 Inflatable Windsurfer 11’2″ x 31+″ iGO
  • 2022 Inflatable Windsurfer 11’2″ x 31+″ iGO
$1,374.00

Out of stock Call for availability

Description

 
screen-shot-2021-09-17-at-10.37.02-am.png
 
 
 
 

WOVEN DROPSTITCH TECHNOLOGY

The new woven dropstitch technology is used on the top and the bottom of the board.
The process starts with a glue-free PVC lamination. The new weave provides a structure for the polyester yarns – which gives the board its shape. The weave has less give than the traditional knitting method. Knitted fibers have soft and stretchy properties, whereas this new weaving is superior in stiffness, reflex, and rigidity.
 
 

WELDED RAIL TECHNOLOGY

Starboard’s Welded Rail Technology uses a new & advanced heat-welding process whereby the top and bottom layers of the board are mechanically bonded. That means there is no glue used to join the top and bottom along the rails (where leakage can occur) and these joins are now bonded for life – making our boards the most durable on the market!
 

FULL POWER PLANING

Our SUP Windsurfing Inflatable boards feature our 3D Rail Edge technology, a proprietary 3D elastomer compound that follows the contours of the board and creates a release edge that allows the boards to fully plane yet fold and roll up. Thanks to this 3D Rail Edge, you can accelerate and enjoy the most exciting planing sensation possible on an inflatable board.
 

REMOVABLE MAST TRACK

All SUP Windsurfing Inflatable boards use the new removable mast track system that leaves a flat deck in the paddle board mode.
 

EXCLUSIVE FOOTSTRAP SYSTEM

Starboard’s exclusive footstrap insert system uses 7mm thin insert plates that are glued to the board’s surface. The footstraps bolt into the embedded brass plate and two male pins connect through the footstrap for a twist-free fitting.
 

REMOVABLE CENTER FIN

All models have a removable center fin box. Remove the box for an improved paddling experience without the added weight or drag. Attach the box and supplied Drake Shallow center fin to prevent the board from drifting sideways when windsurfing.
 

2 X D-RINGS

They also feature two D-rings: one in the nose that acts as a towing eye for easy transport and one in the tail that acts as a leash plug. Paddle boarding without a leash is dangerous and not recommended.
 

RE-COVER BAG

All of our SUP Windsurfing Inflatable Boards are supplied with our new roller-wheeled bag that packs everything away tidily and conveniently. Made of a RPET 450D outer fabric layer made from recycled plastic bottles, in partnership with Waste2Wear. The bottles are chopped into flakes, washed, melted and extruded into yarns and then spun into a fabric. Between 30 to 50 bottles are used per bag. Bottles that now re-enters the market again, without risk of polluting the environment. Ripstop weaving technology improves wear and tear resistance.
 

TIKI PUMP

All our Deluxe boards are supplied with our ergonomic highly efficient Tiki Pump and all our Zen boards are equipped with our benchmark V8 Double Action pump. Inflate your board faster and easier with continuous pumping cycles in both down and upward action. Turn the switch and it becomes a single action pump for easy inflation to 18 PSI. Always inflate between 15 and 18 PSI for maximum stiffness and performance.
View AllClose