Product Description

2020 HOVER WINDSURF Windsurf Package W/ 2020 JET | WINDSURF 1150

WINDSURF FOIL COMBO

Continuing to lead the charge in wind foiling, Naish has continued to further develop the Hover Windsurf board range. Based off the success of the Hover 122 & 142 the Naish designers took feedback from users all over the world to continue to improve them. The 2020 shape is more compact yet maintains the overall balance of the boards identical which is important for foilboards that are used in what would traditionally be considered non-planing conditions. The tail has been widened with additional volume added making it easier to step into the foot straps, even before getting onto the foil.

For riders who want to ride more powered up with bigger sails, outboard foot strap inserts have been added for a more comfortable stance. With the new foot strap insert setup, sailors can now tune the Hover for a more locked in'slalom'like stance which requires more sail power while the inside foot strap positions will suit riders who want to effortlessly foil with smaller sails. The Hover 125 & 145 are dedicated foil windsurf boards that will take riders from their first flight and beyond on the non-competitive stage.

2020 JET | WINDSURF 1150

The 2020 Windsurf Foil Set 1150 takes windsurf foiling to a new level. With foil racing developing into a very high-end corner market, not viable for non-racing, we've created a foil set that closes the gap from first time foiling to performance free-race foiling.

The new windsurf setup comes with a user-friendly 75 cm mast and sets a new standard in free-ride and free-race foils. Keeping the easy access that our windsurf foils are known for and combining it with a new speed realm that is easy to reach without ever getting out of control. This new setup can accommodate bigger sails more naturally then our 2019 setup allowing for more side pressure in a completely natural windsurfing stance.

The 2020 windsurf wing is designed to work with the 2020 Stabilizer 320.

COMPLETE KIT INCLUDES

• Abracadabra plate
• Fuselage
• Front Wing
• Mast
• Stabilizer
• Titanium Foil Assembly Screw Set
• 3 x 30 mm M6 Titanium Torx screws
• 3 x 30 mm M6 Stainless Steel Torx screws
• 5 x 20 mm M6 Titanium Torx screws
• Note: Jet 2450 attaches with (3) M6 x 30mm screws. DO NOT USE 20 mm screw with the Jet 2450.
• Abracadabra Mounting Screw Set
• 4 x 30 mm M6 Stainless steel Torx screws
• 4 x Stainless Steel T-nuts
• Foil Wing Covers & Carry Case
• Torx T30 Driver